No heat adsorption compressed air dryer

A adsorption drying device without heat adsorption compressed air drying machine room. His role is to remove water in the air through the principle of transformer adsorption, so as to achieve the purpose of dry air. Using the porous surface of the adsorbent -free dryer to use the porous surface of the adsorption agent can choose to adsorb certain component characteristics, adsorb the water in the air in the adsorption agent's acupoint, so as to remove the water in the air. After the adsorbent works for a certain period of time, the adsorbent reaches the saturated adsorption balance, and it is necessary to use a dry gas near the normal pressure to regenerate the adsorbent to restore the adsorption ability of the adsorbent. Because the adsorbent can adsorb-regeneration cycle, the heat-free regenerative dryer is continuously safe and reliable

The heat -free regeneration dryer is mainly composed of the following devices: two adsorption towers used alternately, a set of muffler system, a set of switching valves, a set of control systems and gas source treatment units.

Micro -heat adsorption compressed air dryer

Micro -heat adsorption compressed air dryer (micro -heat absorbing machine), absorbing products that have two ways: heat regeneration and no heat regeneration, use the ability of desiccant to adsorb water, and after temperature change and transformer adsorption adsorption The principle of relieving suction is dry and dry. Regenerating the regeneration of the regeneration gas can not only improve the regeneration effect, but also reduce the amount of gas consumption.

Micro -heat regeneration dryer is mainly composed of the following devices: two adsorption cylinders used alternately, a electric heating device, a set of mucoping system, a set of switching valve devices, an electrical Confucius system and gas source treatment unit.

Compressed air residual heat recycling dryer

The residual heat regeneration dryer is a new type of adsorption dryer. It is neither a thermal regeneration, nor does it belong to the heating -free regeneration, but is a temperature -changing transformer adsorption. , So that the adsorbent can be completely regenerated, so it can make full use of its own energy and has energy saving effect.

The compressed air residual heat recycled dryer is a dual tower structure. The tower is filled with an adsorbent. When one tower is undergoing a dry process, the other tower is performed by the suction process.

The compressed air waste heat regeneration dryer is mainly composed of the following equipment: two alternate adsorption towers, one silencing system, one air cooler, one gas-liquid separator, optional auxiliary electric heating system, one switching valve, one control system and air source treatment unit.

ARTICLE SOURCE: AIDIKEJIDIAN